Automatic Granule Packaging Machines Should Pay More Attention To Details When Using Them

Looking at the development of domestic packaging machines, packaging machines have gone through several generations of efforts, from the initial mechanical control to single-chip microcomputers and now to PLC industrial control, they have all been developed from scratch step by step, which determines the development direction of automatic granule packaging machines. What we call market demand is what every packaging machine manufacturer must do to meet market demand. This is also the prerequisite for winning in the fiercest competition. For automatic granule packaging machines, nowadays This era is no longer the era where everything is fine as long as it can be packaged. Today's businesses not only require measurement accuracy, aesthetic appearance, machine stability and speed, etc., which are the prerequisites for many customers to choose to buy, but the development direction of packaging machines must be high, precise, and cutting-edge.

What merchants need to know after purchasing the automatic granule packaging machines are the maintenance methods that need to be paid attention to during use:

1. Lubrication: regularly add engine oil to the meshing parts of each gear, the oil filling hole of the bearing with the seat, and each moving part, once per shift.

2. The reducer is strictly prohibited from operating without oil. After the first 300 hours of operation, clean the inside and replace it with new oil. Change the oil every 2500 hours after that.

3. When adding lubricating oil, please be careful not to drip oil on the transmission belt to prevent slipping and loss of rotation or premature aging and damage to the belt.

4. Maintenance: Check the screws in all parts regularly to ensure they are not loose.

5. The electrical parts should be waterproof, moisture-proof, anti-corrosive, and rodent-proof, and ensure that the inside of the electric control box and the wiring terminals are clean to prevent electrical faults.

6. When stopping the machine, the two heat-sealing bodies should be in an open position to prevent the packaging material from being scalded.

7. Cleaning: The metering part should be cleaned promptly after shutdown. For packaged materials with high sugar content such as granules, the turntable and unloading door should be cleaned every shift.

8. Clean the heat sealer body frequently to ensure clear sealing lines of the finished packaging bag.

9. Scattered materials should be cleaned up in time to keep the machine parts clean to extend the service life.

10. Clean the light-emitting head of the photoelectric switch (electric eye) frequently to ensure its reliable operation.

11. Clean the dust in the electric control box frequently to prevent electrical faults such as short circuits or poor contact.

Thank you for reading, please get in touch with us if you have any inquiries.

LANDPACK would be your reliable supplier of packing machines.

If you have any questions about the machine, feel free to contact us or leave your machine inquiry on our website, our sales managers and engineers will be here to support you and provide you with a suitable packing solution.

You could contact us by our website address or phone number, our sales managers will contact you in time and give you professional suggestions. And our engineers are willing to help you to solve the machine problem and teach you one step by step on video calling.